Home / Event Signage / Display Stands
Display Stands

Custom Display Stands for New Jersey Stores, Lobbies and Events

We build display stands NJ stores, offices, schools and event teams use to put a sign right where people stop: freestanding panels, sign holder stands, totems and cutout standees. We print the graphics, make the panels and feet in our Linden shop, and deliver and set them up or have them ready for pickup. Need displays for a venue in the five boroughs? See our NYC service area.

Panels to Totems
Freestanding, framed or cut to shape
No Wall Needed
Stands on its own base
One or Two Sides
Print the back too
Built in Linden
Printed and made in house
Tall dark freestanding totem with a purple event graphic beside a window in an office lounge
Curved purple banner totem reading Match your tags with your bags at an airport check in area
Orange freestanding totem pointing to the restrooms in an open office
Black and white striped sale display with a red 50 percent off circle inside a store
Display stands from our jobs
Real jobs: an event totem, an airport banner, an office wayfinding totem and a store sale sign.
Where we install
Built in Linden. Our crews travel to you.

New JerseyHome base

New York CityAll five boroughs

PhiladelphiaPennsylvania

ScrantonPennsylvania

Bases, Feet and Frames

What Holds a Display Stand Up

The base decides how a display looks and how easy it is to move. Every sample below is from a stand we made.

Black display panel standing in two half moon feet on a patterned carpet
Half moon feet
Slot onto the panel, low profile
Close up of a black steel A shaped foot holding a white display panel on a tile floor
A frame foot
Holds tall panels steady
Curved black foot under a long white display panel on a light floor
Curved foot
A soft shape on the floor
Black poster stand with two posts and a square base holding an orange sale poster
Post and plate
Poster frame on two posts
Banner hanging from a single pole on a round base in a bank branch
Single pole
Banner on a round base
Back view of an X frame stand with crossed poles behind a white banner
X frame
Crossed poles, very light
Dark freestanding display panel with an event announcement standing on low feet in a shop
Panel on feet
Rigid board, no frame
Close up of a curved purple banner held in a frame next to a check in counter
Curved frame
Banner bent into a curve

Feet that slot onto the panel keep the look clean and pack flat. Poles and frames make it easy to swap the print later. For a retractable stand that rolls up, see our banner stands.

Display Types

Four Kinds of Display Stands We Make

Same printing, four different jobs on the floor. Price marks compare stands of a similar size.

Tall white freestanding display panel with sponsor logos and an event title
Freestanding

Freestanding Panel Displays

A printed rigid panel on feet. Tall enough to see over a crowd, and two sided if it stands in the open.

Metal sign holder stand with a framed price sign for tees, tanks and shorts in a store
Sign holder

Sign Holder Stands

A metal stand with a frame that holds a printed sign. Slide in a new print when the sale or menu changes.

Blue freestanding totem reading Presentation Room next to a doorway
Totem

Wayfinding Totems

Tall, narrow signs that name a room or point the way in offices, venues and lobbies, with no holes in the wall.

Printed cutout standee of a green and white cartoon robot standing in the shop
Cut to shape

Cutout Standees

Your mascot, product or character printed and cut to its outline, with a support on the back.

DisplayWhat it isBest forPrice level
Freestanding panelRigid printed board on feetSponsor boards, event info, photo panels$$
Sign holder standMetal stand with a frame for a printSales, menus, notices that change$ to $$
Poster standPoster frame on posts and a baseEntrances, sidewalks, lobbies$
Wayfinding totemTall narrow sign on a baseRoom names and directions$$ to $$$
Curved banner totemBanner held in a curved frameCheck in areas and counters$$
Cutout standeePrinted board cut to a shapeMascots, products, photo spots$$

Need something for a table or counter instead? See tabletop signs.

Anatomy of a Display

Five Parts of a Freestanding Display Panel

The simplest display stand we make, and the one most events start with.

Front and side view of a freestanding display panel. Not to scale: the panel edge is drawn thicker so it reads.
1
Printed face Your art
Logo, photos and copy printed full color on the front.
2
Rigid panel Board
A stiff board cut to size, so the display stands flat without a frame.
3
Feet Base
Feet that slot onto the bottom edge. Metal or board, low or tall.
4
Back side Optional
Left plain, or printed too when people walk past from both sides.
5
Footprint Balance
The feet reach in front of and behind the panel so it does not tip.

We stand every panel in its feet in our shop before it leaves, so it arrives straight and ready to place.

Our Work

Display Stands We Built for New Jersey and New York

Event boards, photo panels, room totems and product displays. Every photo is a real job.

Red freestanding display panel listing names for event breakout groups
Breakout groups list
Tall freestanding panel printed with a photo of rows of white memorial markers
Photo panel for an exhibit
Tall freestanding panel printed with a photo of a wooden path through a forest
Full height photo panel
Freestanding panel printed with a long hospital hallway photo
Scene panel for a set
Row of tall white display panels with sponsor logos lined up along a hallway
A run of sponsor panels
Podium front printed with a purple event graphic in an office with large windows
Matching podium graphic
White banner display for jarred foods with bold black and red text
Product banner for a market
Blue presentation room totem standing next to a dark doorway
Room totem in an office
Events or Everyday

Display Stands for an Event or for Every Day

Some displays are used for one night. Others stand in your lobby for years. We build for both.

Event and trade show displays

  • Sponsor boards, schedules, seating charts and breakout lists.
  • Panels that pack flat, with feet that slot on at the venue.
  • Matched to your step and repeat and table graphics, so the room looks planned.
  • Delivered and set up at the venue, or ready for pickup in Linden.

Store, lobby and office displays

  • Sign holder stands for sales and menus, with prints you swap as often as you like.
  • Room and direction totems that work with your wayfinding signs, with no holes in the wall.
  • Heavier bases and stiffer panels for spots with lots of foot traffic.
  • The same look across every location when you have more than one store.
Shop to Floor

How We Make and Set Up Your Display Stands

Printed, cut and assembled in Linden. Our sign fabrication team builds the bases in house. Ask about rush timing when you request a quote.

Metal display foot bracket laid on a table next to a tape measure
01

Size the feet

We measure the feet against the panel so the panel sits tight.

White display panel with a world map graphic standing in its feet in the shop
02

Fit and stand

The printed panel goes into its feet and we check that it stands straight.

Dark event display panel standing in the shop aisle for a final check
03

Final check

We look over the print, the edges and the base before it is packed.

Dark event totem with a purple graphic set near a stair rail and a plant in an office
04

Set in place

We deliver and set it where you need it, or you pick it up in Linden.

Price

What Sets the Price of a Display Stand

One quote covers the design, printing, the base and delivery or setup.

What moves your price
There is no flat price per display. These set the number on your quote.
Get your price
Size and count
Height, width and how many
Panel material
Board, rigid plastic or metal
Base or frame
Feet, poles, plates or frames
One or two sides
Printing the back adds cost
Cut shape
Rectangles cost less than cutouts
Design work
Your file or our designer
Timing
Ask about rush timing
Delivery and setup
Pickup, delivery or set in place
Who Uses Them

Where Display Stands Work Best

Display stands for New Jersey stores, offices and venues: anywhere a sign needs to stand on its own.

Retail stores
Sale signs, new arrivals, window displays.
Trade shows and expos
Booth panels and product displays.
Conferences and galas
Sponsor boards, schedules, seating.
Corporate offices
Room totems, lobby displays, town halls.
Airports and transit
Check in and boarding information.
Schools and colleges
Open houses, exhibits and directions.
Clinics and hospitals
Waiting room info and directions.
Restaurants and hotels
Menus, specials and event welcomes.
How It Works

From Your Photo to a Finished Sign in Four Steps

One team and one price. Your quote covers the site survey, design, fabrication and installation, so nothing gets passed to another company.

01
You

Send a photo and your logo

A photo of the wall or storefront, your logo and a rough size. Use the form, email or a call.

02

Get your proof and price

We survey the site when needed and send a drawing with sizes, colors and mounting, plus one all in price.

03
Gogi Signs

Approve and we build

A 50 percent deposit starts production in our Linden shop. If the sign needs a permit, we help with the drawings and paperwork.

04
Gogi Signs

We install, you pay the balance

Our own crew installs it, with bucket and boom trucks for high work. The balance is due at installation.

About Gogi Signs

A Family Owned Sign Shop in Linden, NJ

Gogi Signs has built signs for New Jersey businesses since 2005. Today one team in Linden designs, prints, cuts, builds and installs every job.

Nothing is brokered out. The people who quote your sign are the people who build it and hang it.

20+
Years building signs
10,000
Sq ft shop floor
Mon to Sat
Open 9 AM to 6 PM
1 team
Design, build, install
Meet Gogi Signs
Service Areas

Built in Linden, Installed Across New Jersey

Our shop sits in Union County, so New Jersey jobs are a short drive for our crews. We also take larger projects and rollouts in Philadelphia and Scranton.

All five boroughs

New York City

Storefronts, offices and lobbies across the city.

New York City service area
We travel

Pennsylvania

Larger projects and multi location rollouts.

  • Philadelphia, PA
  • Scranton, PA
Call to plan your project
We Come to You
Our own crews and trucks travel to your site.
Site Surveys
Installation and Removals
Rush Orders
Licensed and Insured
FAQs

Display Stand Questions

Straight answers to what New Jersey stores, offices and event teams ask about display stands.

What is a display stand?

A sign that stands on its own base instead of hanging on a wall. It can be a printed panel on feet, a frame on a pole, a totem or a cutout standee.

Metal stands with a frame that holds a printed sign. You slide a new print in when the sale, menu or notice changes, and keep the stand.

Yes. Freestanding panels, totems and many sign holders can carry a print on the front and back, which works well in the middle of a room.

Most are rigid boards such as foam board, ultraboard, PVC or acrylic. We pick the board by size, weight and how long the display needs to last.

Some can, like a poster stand on a weighted base at an entrance. For full time outdoor use we usually suggest sidewalk signs.

Yes. We can deliver and set the displays in place at your store, office or venue, or have them ready for pickup at our Linden shop.

Yes. Send your logo, copy and photos and our sign design team lays it out. You approve a proof before we print.

It depends on the size, the panel, the base, one or two sided printing, the shape and how many you need. Send a rough size and your artwork for a price.

Yes. We deliver and set up display stands in NYC across all five boroughs. See our NYC service area.

Free Quote

Start With a Photo and Your Logo

Send what you have. We reply with a drawing and one price that covers the survey, design, fabrication and installation.

Your logo
Any file, even a photo of a business card
A site photo
The wall, window or storefront
A rough size
Width and height are enough
The address
So we can plan the install

Request a Free Quote

Tell us about your project. A photo and your logo are enough to start.

Site photos, logos, artwork, PDFs, sketches, measurements, or photos of an existing sign.

Prefer to talk? Call 908-486-7000.