Sign Installation
Commercial Sign Installation in New Jersey
Our own insured crews install storefront signs, channel letters, blade signs, awnings, lobby letters and more, from ladders, lifts and bucket trucks. We install what we build and signs made by other shops. We also install in the five boroughs; see our NYC service area.
Own Crews
No subcontractors
Insured
COIs on request
Lifts and Trucks
Ladders to buckets
Other Shops
Their signs welcome
Night installs
Crews work around your business hours.
Where we install
Built in Linden. Our crews travel to you.
New JerseyHome base
New York CityAll five boroughs
PhiladelphiaPennsylvania
ScrantonPennsylvania
Installation
The Last Step Is the One People See
A well built sign can still look wrong if it goes up crooked, leaks at the wall or is wired in a hurry.
Our installers check the wall, set patterns, level every letter and seal penetrations. For lit signs, connections are made by qualified electricians. When the sign is up, we clean the site and walk it with you.
Working on a building with strict rules? We handle certificates of insurance, building access and work hours before the install date.
Learn more: OSHA, Aerial lift safety; NYC Department of Buildings, Installing a business sign.
Level and centered
Patterns and lasers on site.
Insured crews
COIs to your landlord.
Your hours
Early, late and weekend work.
Sealed and clean
No open holes left.
What We Install
Signs and Graphics We Put Up
Indoor, outdoor and at height.
Rooftop and large signs
Frames and cabinets on roofs and high walls.
Fence banners and site signs
Mesh, banners and project boards.
Our crews leave Linden every morning for installs across New Jersey, including Union County, Bergen County, Newark, Jersey City, Toms River. In New York City we also work in all five boroughs, including Bronx.
Access and Equipment
The Right Equipment for the Height
We plan access at the survey so the right crew and equipment show up.
| Job | Typical access | Notes |
|---|---|---|
| Lobby and office signs | Ladders and lasers | Often done before opening or after closing |
| Storefront signs on one story buildings | Ladders or a small lift | Sidewalk protection when needed |
| Second floor and higher signs | Bucket truck or boom lift | Street or sidewalk permits where required |
| Ground and post signs | Digging and concrete | Utility mark out before we dig |
| Lit signs | Lift plus electrical work | Connections made by a licensed electrician |
Digging for post signs? New Jersey requires a mark out request first. See New Jersey One Call.
How It Works
Install Day, Step by Step
Most installs follow the same four steps.
01
Access set up
Ladders, lift or truck set up and the work area protected.
02
Pattern and drill
A full size pattern marks every hole before we drill.
03
Mount and wire
The sign is mounted, leveled, sealed and connected.
04
Check and clean
We test it, clean up and walk the sign with you.
Wholesale and Trade
Installation for Sign Shops and Print Providers
We install signs built by other companies, under your name. Send the drawings and site details and we quote the labor.
- Install only work for the trade
- Your branding, no client contact
- Photo completion reports
- Overflow capacity in busy seasons
- Multi site rollouts
- Insurance certificates on request
Who orders wholesale from us
Sign makers and print shops
We build it, you sell it under your name.
Shopping mall and plaza owners
Matching tenant signs to your center specs.
Franchisees and multi location brands
The same sign at every location.
Freelancers and design agencies
Your design, produced and delivered for your client.
One Team
The Rest of the Job, Handled by the Same People
One project path from first visit to final check. Book the whole path or just the step you need.
Plan
Build and Install
5
Sign Installation
Our own crews and lifts
You are here
What We Make
Signs for Inside, Outside and On the Road
Every sign family below is designed, built and installed by our own team in Linden. Tap one to see the jobs and options.
About Gogi Signs
A Family Owned Sign Shop in Linden, NJ
Gogi Signs has built signs for New Jersey and New York City businesses since 2005. Today one team in Linden designs, prints, cuts, builds and installs every job.
Nothing is brokered out. The people who quote your sign are the people who build it and hang it.
20+
Years building signs
10,000
Sq ft shop floor
Mon to Sat
Open 9 AM to 6 PM
1 team
Design, build, install
Meet Gogi Signs
Service Area
Where We Work
Our survey, install and service crews leave our Linden shop every day for jobs across New Jersey and New York City.
Closest to our shop
North and Central Jersey
Short drives from Linden, so surveys, repairs and installs are quick to book.
All New Jersey areas
Planned trips
Shore and South Jersey
Installs, rollouts and repairs planned around your schedule.
All New Jersey areas
All five boroughs
New York City
Storefronts, offices, lobbies, malls and hotels. Surveys, installs and service calls.
NYC service area
FAQs
Sign Installation FAQs
What business owners and managers ask before install day.
Do you install signs made by other companies?
Yes. We install signs from other fabricators and online sellers. Send photos, drawings and the hardware list and we quote the labor.
Are your installers insured?
Yes. Our crews are insured, and we issue certificates of insurance to match your building or landlord before the install date.
Who connects the power for lit signs?
Lit sign connections are made by a licensed electrician. Some towns also require an electrical permit and inspection. See electrical sign inspections.
Can you install outside business hours?
Yes. Early, late and weekend installs are common for stores, offices and malls. Tell us your hours when you book.
Do you need a permit to install my sign?
Many signs need town approval before install, and lit signs often need an electrical permit. We help with the paperwork. See sign permits.
What happens to the old sign?
We can remove it on the same visit and patch the wall. See sign removal.
Do you install in New York City?
Yes, in all five boroughs. NYC signs often need a licensed sign hanger and a Department of Buildings permit, which we plan for. See our NYC service area.
Keep Exploring
Related Signs and Services
Plan the install, see the signs we put up, or ask about trade installs.
From Our Blog
Guides on Getting a Sign Up
Plain answers from our shop on materials, sizing and planning. See all articles
Lit Signs
When Do Electrical Signs Require Inspections?
Which lit signs need an electrical permit and what the inspector checks.
Read article
Planning
How Long Does a Custom Sign Project Take?
Survey, design, permits, production and install, step by step.
Read article
Planning
Planning a Complete Business Sign Package
Every sign a new location needs, from the street to the restroom door.
Read article
Free Quote
Start With a Photo and Your Logo
Send what you have. We reply with a drawing and one price that covers the survey, design, fabrication and installation.
Your logo
Any file, even a photo of a business card
A site photo
The wall, window or storefront
A rough size
Width and height are enough
The address
So we can plan the install
Call908-486-7000
Emailinfo@gogisigns.com
Shop7 W Baltimore Ave, Suite B, Linden, NJ
HoursMon to Sat, 9 AM to 6 PM
Request a Free Quote
Tell us about your project. A photo and your logo are enough to start.
Prefer to talk? Call 908-486-7000.