Home » Service Areas » New Jersey » West New York
West New York, Hudson County
Gogi Signs makes slim storefront signs, awnings, window graphics and office signs for West New York, including the narrow shopfronts on Bergenline Avenue. We size each sign to the town’s frontage formula, keep it within the 8 inch projection limit and install with our own crew.

Signs for narrow storefronts
A full width fascia sign over a busy shopfront.
Frontage Formula
West New York allows two square feet of sign for every foot of frontage, up to 40 square feet for a single occupant. These are typical Bergenline widths.

On the Sidewalk
A West New York wall sign may stick out no more than 8 inches from the building, with its lowest point at least 7 feet above the sidewalk. Deep lit cabinets and raceways have to be built thin to fit, so we usually suggest low profile channel letters, flat aluminum panels or slim light boxes.
In a shared building, each business still works from two square feet per foot of its own frontage, but all signs on that frontage together are capped at 10% of it. We measure the neighbors’ signs too, so your sign does not push the frontage over.
For Bergenline Businesses

The name on the valance and color across the front.

Hours, services and both languages on the glass.

Lit cabinets built thin for the projection limit.
Taking Over a Space
We take down the previous tenant's sign and patch the fascia. See sign removal.
If the old cabinet is sound and conforms, a new face is usually quicker and cheaper than a new sign.
No sign other than an official traffic sign may go in the street right of way.
Signs on residential blocks sit flat, within 6 inches of the wall, with shielded lighting.
Why Gogi Signs
Gogi Signs has made signs in Linden since 2005. We serve Bergenline and the rest of Hudson County, our installers are experienced, licensed and insured, and we repair and reface signs that other companies built. See our Hudson County sign company page for nearby towns.
NJ & NYC Service Area
West New York is in Hudson County. These are the rules from West New York's own sign ordinance that most often shape what a business can put up.
Source: Town of West New York Code, Chapters 338 and 414.
Where a commercial lot has a single occupant, sign area is allowed at two square feet per linear foot of the building frontage the sign goes on, up to a maximum of 40 square feet for the business.
Ch. 338, Art. IIIWhere several businesses share a building, each still works from two square feet per linear foot of its frontage, but all signs on that frontage together are capped at 10% of it.
Ch. 338, Art. IIIWall signs may project no more than 8 inches from the building and must be mounted with their lowest point at least 7 feet above the sidewalk.
Ch. 338, Art. IIIIndustrial signs follow the same two-to-one ratio up to 100 square feet, or up to 400 square feet on sites of one acre or more.
Ch. 414, Art. VNo sign other than an official traffic sign may be placed within the right-of-way of any street.
Ch. 414, Art. VIn residence districts a sign must be flat against the building, projecting no more than 6 inches and no higher than the building, or freestanding at least 15 feet from the lot line and no more than 5 feet tall. Lighting must be indirect and shielded to the sign face. Nameplates are limited to 1 square foot per unit.
Ch. 414, Art. VOrdinances are amended from time to time, and zone, overlay and lease requirements all apply on top of the figures above. We confirm the current requirements with West New York for your specific property during the site survey.
West New York is part of our Hudson County sign company coverage.
Where a commercial lot has a single occupant, sign area is allowed at two square feet per linear foot of the building frontage the sign goes on, up to a maximum of 40 square feet for the business. (Ch. 338, Art. III.) The exact allowance depends on the zone and the building, which we confirm during the site survey.
Storefront and building signage, channel letters, illuminated cabinets, interior and ADA signage, wayfinding, window and wall graphics, and vehicle graphics. If you are not sure which suits the site, the survey usually settles it.
Often yes, when the cabinet's structure, size, location and electrical condition are still sound. Replacing a face can still count as new signage under some ordinances, so we check whether the existing sign conforms before quoting a reface.
Regularly. Lease sign criteria are often stricter than the town's rules, and both have to be cleared, so we read the criteria alongside the ordinance before a design is finalized.
Yes. We design, fabricate, permit and install from our own shop in Linden rather than brokering the work out, so one company stays accountable from the survey through to the final inspection.