Home » Service Areas » New Jersey » Perth Amboy
Perth Amboy, Middlesex County
Gogi Signs makes storefront signs, awnings and window graphics for Perth Amboy, from the shops on Smith Street to businesses near the waterfront. We design to the city’s signable area rules, prepare the drawings for the Zoning Officer and install with our own crew.
Popular services: office signs in NJ.
Storefront signs and awnings
Bright fascia signs for neighborhood shops and restaurants.
Signable Area
Perth Amboy measures wall sign allowances against the signable area: the part of the facade below the sill of the second story windows that is free of windows and major architectural detail. The percentage of that area you can use is set by the city’s design table for your zone.
On a Smith Street storefront, that usually means the band between the top of the shop window and the floor above. We measure that band, not the whole building, and lay the sign out inside it. Where a sign is made of individual letters, only the rectangles around the letters count.
Smith Street Storefronts
Spanish is widely spoken in Perth Amboy. We set English and Spanish in one layout so neither looks added on.
A name and a service line on the valance, with shade for the window. See awnings.
Hours, services and branding on the glass in cut or printed vinyl.
Window sale signs need no permit but go up no more than 14 days before the sale, with its dates on them.
The Permit
Perth Amboy’s ordinance is permissive by list, so any sign type it does not name is prohibited. We check the list for your zone first.
1
Confirm the sign type is permitted in the zone and only names a use on the premises.
2
The signable area below the second floor sill and any freestanding height, capped at 15 feet unless the zone says otherwise.
3
We prepare the drawings and details the city's form asks for.
4
Our licensed and insured crew installs and removes any old sign.
What We Make

Name, services and phone on the valance and drop.

A bright box sign for a shop that is open into the evening.

Cut vinyl for salons, shops and offices.
Get Started
Send a photo of the storefront, the address and the wording, in one language or two. We will check the zone and the signable area and send a quote.
Perth Amboy is in Middlesex County. These are the rules from Perth Amboy's own sign ordinance that most often shape what a business can put up.
Source: City of Perth Amboy Code, Chapter 430, Article XI.
Perth Amboy's ordinance is permissive by list: any sign that is not specifically permitted is prohibited. Apart from special event signs, signs may only identify a use actually conducted on the premises.
Art. XIWall sign allowances are measured against the building's signable area: the part of the facade below the sill line of the second-story windows that is free of windows and major architectural detail. The allowed percentage of that area is set by the city's Table of Basic Design Elements for each zone.
Art. XI, Signage Design StandardsWhere a sign is made of individual letters or numbers, its area is the smallest rectangle or set of rectangles that encloses all of them.
Art. XIUnless a zone says otherwise, freestanding signs may not exceed 15 feet above ground level.
Art. XIWindow sale signs need no permit but may go up only 14 days before the sale, must show its start and end dates, and come down when it ends.
§ 430-62Every sign other than those expressly excluded needs a sign permit, applied for to the Zoning Officer on the city's form.
Art. XINon-illuminated directional signs for parking, loading, entrances and exits may carry a logo or business name but no advertising, up to 3 square feet. A home occupation is limited to one nameplate of 1 square foot, set back 10 feet from the street.
§ 430-62Ordinances are amended from time to time, and zone, overlay and lease requirements all apply on top of the figures above. We confirm the current requirements with Perth Amboy for your specific property during the site survey, before anything is designed.
Perth Amboy is one of the Middlesex County communities we serve from Linden, alongside our other New Jersey service areas.
Every sign other than those expressly excluded needs a sign permit, applied for to the Zoning Officer on the city's form. (Art. XI.) We prepare the drawings and details the application asks for, and help you or your landlord file it.
Yes. We design, fabricate, permit and install from our own shop in Linden rather than brokering the work out, so one company stays accountable from the survey through to the final inspection.
Fabrication time depends on the sign, but the variable that usually moves the date most is municipal approval. A flat panel or vinyl job can move quickly, but an illuminated sign that needs permits and an electrical inspection takes longer. We give a schedule after the survey, once we know which approvals apply.
Storefront and building signage, channel letters, illuminated cabinets, interior and ADA signage, wayfinding, window and wall graphics, and vehicle graphics. If you are not sure which suits the site, the survey usually settles it.
Often yes, when the cabinet's structure, size, location and electrical condition are still sound. Replacing a face can still count as new signage under some ordinances, so we check whether the existing sign conforms before quoting a reface.