Table Tents and Counter Cards
Cards on easels for desks and counters.
Home / Rigid Signs / Styrene and Ultraboard Signs
Styrene and Ultraboard Signs
Styrene and Ultraboard Signs for Menus, Counters and Retail Displays
Thin styrene for menus, table tents, counter cards and shelf signs, and stiff Ultraboard for retail displays and large inside panels. Printed in full color in our Linden shop, cut to size with easel backs, and ready for pickup or delivery across New Jersey. We also deliver in the five boroughs; see our NYC service area.
Styrene
Thin and printable
Ultraboard
Stiff, warp resistant
Easel Backs
Stands on its own
Inside
Menus and displays
Menus that stand up
Printed styrene menu cards with a purple border.
What They Are
Styrene or Ultraboard: What Is the Difference?
Styrene is a thin, smooth plastic sheet, from about .020 to .060 of an inch. It prints sharp and bends a little, which makes it right for menus, table tents, counter cards and shelf signs.
Ultraboard is a stiff foam board with a hard plastic face. It is light like foam board but resists warping, so it suits large retail displays and panels that must stay flat.
Both are for inside. For a light board for one event, see foam board.
Learn more: Laird Plastics, Ultraboard foam board.
Sharp print
Smooth faces.
Light
Easy to move.
Thin or stiff
Styrene or Ultraboard.
Retail ready
Menus and POP.
Uses
What People Use Styrene and Ultraboard For
Real jobs from our shop.
Easel Backs
Cardboard and plastic easels so signs stand up.
Counter Displays
Panels on wire easels for counters.
We print styrene and Ultraboard signs in Linden for businesses across New Jersey, with pickup, delivery and installation most days in Hoboken, Jersey City, Paramus, Edison. In New York City we deliver and install in all five boroughs, including Brooklyn.
Sizes and Options
Styrene and Ultraboard Thickness and Options
Common choices. Any size is cut to order.
| Option | What we offer |
|---|---|
| Styrene thickness | .020 to .060 inch, .040 is common for menus and cards |
| Ultraboard thickness | 3/16, 1/2 and 1 inch |
| Full color, one or both sides on styrene | |
| Shape | Square, rounded or cut to shape |
| Display | Easel backs, table stands, floor stands or hanging |
| Inside or outside | Inside only |
| Quantity | One sign up to store wide runs |
From about $29 a sign
A single small printed styrene sign typically starts around $29. Ultraboard is quoted per job. Typical online starting price for one small sign in October 2026, shown as a guide. It is not a Gogi quote. Your price depends on size, quantity, print and installation.
Get your price
Material
Styrene or Ultraboard
Thickness or depth
Thin card to 1 inch board
Finish
One or two sides
Mounting and wall
Easel backs or stands
Compare
Styrene vs Ultraboard vs Foam Board
Pick by how stiff the sign must be and how long it stays up.
| Board | Life outside | Weight | Cost | Best for |
|---|---|---|---|---|
| Styrene | Inside only | Very light | Low | Menus, table tents and shelf signs |
| Ultraboard | Inside only | Light | Mid | Large displays that must stay flat |
| Foam board | Inside only | Lightest | Lowest | One time events and presentations |
Outdoor life is a typical range; sun, wind and mounting change it. Compare every board on our Rigid Signs page or in our sign material guide.
Good to Know
Before You Order Styrene or Ultraboard
A few tips from our shop that save time and money.
- Use styrene for anything thin that slides into a holder or sits on a table.
- Pick Ultraboard for panels larger than about 24 inches that must stay flat.
- Plan easel backs or stands with the order so signs arrive ready to use.
- Print store wide runs together so colors match from sign to sign.
What We Offer
Styrene and Ultraboard Signs: Print, Cut, Mount and Install
Everything after the artwork is done in our Linden shop or by our own crews.
01
Full color print right on the board, or cut vinyl letters for sharp, simple text.
02
Cut and Shape
Straight cuts, rounded corners, drilled holes and routed custom shapes.
03
Protect
Laminate for signs that face sun, rain or a lot of hands.
04
Mount
Stakes, frames, posts, standoffs, rivets and tape, matched to the board.
05
Install
Our own crews put signs up on walls, posts, fences and in the ground.
06
Pick Up or Delivery
Collect from our Linden shop, or we deliver across New Jersey and NYC.
One Shop From File to Finished Sign
Send your artwork or a rough idea. We set it up, send a proof, print, cut and finish in Linden, then hand it over, ship it or put it up for you. Need design help? See sign design.
Request a Free Quote
How It Works
From Your Photo to a Finished Sign in Four Steps
One team and one price. Your quote covers the site survey, design, fabrication and installation, so nothing gets passed to another company.
01
You
Send a photo and your logo
A photo of the wall or storefront, your logo and a rough size. Use the form, email or a call.
02
Gogi Signs
Get your proof and price
We survey the site when needed and send a drawing with sizes, colors and mounting, plus one all in price.
03
Gogi Signs
Approve and we build
A 50 percent deposit starts production in our Linden shop. If the sign needs a permit, we handle the paperwork.
04
Gogi Signs
We install, you pay the balance
Our own crew installs it, with bucket and boom trucks for high work. The balance is due at installation.
Service Areas
Built in Linden, Installed Wherever You Are
Our shop sits in Union County, so most New Jersey jobs are a short drive for our crews. Pick your area to see local work, or call us for projects farther away.
Full coverage
Project coverage
Our shop
New York City
All five boroughs
New York City service area
Philadelphia and Scranton
Projects
Larger projects and multi location rollouts in Pennsylvania. Call 908-486-7000 to plan yours.
FAQs
Styrene and Ultraboard Questions
What restaurants and retailers ask before ordering.
What is styrene used for?
Menus, table tents, counter cards, shelf signs and other thin printed signs that sit on tables or slide into holders.
What is Ultraboard?
A stiff foam board with hard plastic faces. It stays flat and resists warping better than standard foam board.
Ultraboard or foam board?
Foam board costs less and is fine for one event. Ultraboard costs more but stays flat and lasts longer in stores and displays.
Can you add easel backs?
Yes. We add easel backs so table signs and panels stand on their own.
Can styrene be printed on both sides?
Yes. Two sided styrene works well for table tents and hanging signs.
How much do styrene signs cost?
A single small printed styrene sign typically starts around $29. Ultraboard is quoted per job.
Do you deliver to New York City?
Yes, across New Jersey and all five boroughs. See our NYC service area.
Keep Exploring
Related Signs and Services
Compare inside boards, or see more for stores and restaurants.
Other Rigid Boards
Foam Board Signs
Event and presentation boards
PVC and Sintra Signs
Smooth boards for inside
Acrylic Signs
Clear, frosted and glossy
Signs for Stores and Restaurants
Magnetic Menu Boards
Change prices, not boards
Tabletop Signs
Signs for tables and counters
Window Decals
Hours, logos and offers
From Our Blog
Guides on Retail and Menu Signs
Plain answers from our shop on materials, sizing and planning. See all articles
Branding
How Signage Influences Customer Perception
Why people judge price, quality and care from a sign before they meet anyone.
Read article
Sign Design
Typography Tips for Readable Business Signs
Typefaces that hold up at a distance, and the ones that fall apart.
Read article
Sign Design
Common Design Mistakes That Reduce Sign Effectiveness
The handful of mistakes behind most signs that look good on screen and fail on the wall.
Read article
Free Quote
Start With a Photo and Your Logo
Send what you have. We reply with a drawing and one price that covers the survey, design, fabrication and installation.
Your logo
Any file, even a photo of a business card
A site photo
The wall, window or storefront
A rough size
Width and height are enough
The address
So we can plan the install
Call908-486-7000
Emailinfo@gogisigns.com
Shop7 W Baltimore Ave, Suite B, Linden, NJ
HoursMon to Sat, 9 AM to 6 PM
Request a Free Quote
Tell us about your project. A photo and your logo are enough to start.
Prefer to talk? Call 908-486-7000.