— Rigid Signs
Gogi Signs has been printing, cutting and installing rigid signage from our Linden shop since 2005. Coroplast, foam board, PVC, Dibond and acrylic — any size, any shape, hardware included, delivered across New Jersey and New York City.
Since 2005
NJ sign company
No minimum
1 to 500+ signs
Any shape
Laser & CNC cut
Rush available
Same-day on stock
— About Gogi Signs
Gogi Signs is a full-service sign company in Linden, Union County, making signage for New Jersey businesses since 2005. Foam board is one of the highest-volume things we run, because almost every business needs it at some point — a pitch board, a trade show display, a price panel, a welcome sign at the door.
Your artwork goes onto our flatbed press and cures directly onto the board. From there it moves to our own laser and CNC to be cut, shaped and finished. Nothing leaves the building and comes back marked up, which is why a change of size or an extra twenty boards is a phone call rather than a fresh quote.
It also means we can turn foam board fast. There is no edge polishing, no mounting hardware and no drying time to wait on — which matters when the board is for a meeting on Thursday.
— Applications
We stock five panels, and each one suits a different environment, lifespan and budget. Our prices compare like for like at the same size and quantity.
$ · Outdoor · Weeks to a season
We print corrugated plastic yard signs for lawns, verges, fence lines and job site hoardings. Weatherproof, and priced so you can put out hundreds and replace them when your message changes.
$ · Indoor · Event to months
Our lightweight display boards for presentations, trade shows, retail point-of-purchase and event signage. Foam board takes the sharpest print of any panel we run, and mounts with tape or an easel back.
$$ · Indoor / covered · Several years
We cut expanded PVC with a matte finish that reads as a painted sign rather than a printed board. Our customers use it for directories, menu boards, room identification and interior wayfinding sets.
$$$ · Full exterior · Years
The panel we specify for permanent exterior signage — storefronts, building and tenant identification, monument faces and post-and-panel. It will not rust, warp or absorb water.
$$$ · Indoor · Years
We stock clear, frosted and coloured acrylic for reception walls, logo displays, door and suite plates, plaques and awards. It holds a polished edge, and we mount it proud of the wall on standoffs.
We print corrugated plastic yard signs for lawns, verges, fence lines and job site hoardings. Weatherproof, and priced so you can put out hundreds and replace them when your message changes.
Send us the size, where the sign is going and how many you need. We come back with a firm price and a production date the same working day.
— The basics
A rigid sign is printed onto a solid panel instead of fabric or paper, so it keeps its shape without a frame, hem, grommet, or pole pocket. That makes rigid signs useful for all kinds of applications. You can stake one into a lawn, screw it to a brick wall, place it in an A-frame, mount it on standoffs, or set it on an easel. There is no fabric to sag, flap, or wrinkle when the wind picks up.
The right panel depends on where the sign will be used and how long it needs to last. Foam board gives you a clean, sharp print but is not made for rain. Coroplast handles outdoor weather well, making it a practical choice for temporary signs, while Dibond stays flat and durable for long-term use. We choose the material based on the location, installation, and expected lifespan of the sign.
— Local sign company
Ordering rigid signs online means a form, a fixed size list and a courier. We are twenty minutes down the road — you get someone on the phone, and you can change the job after you have placed it.
We print stock sizes and have them ready to collect from Linden, often the day you order.
For exterior and building signage we come out and measure, rather than working from your estimate.
Wall panels, storefront signage and multi-site rollouts fitted by us, not subcontracted. Graphics installation.
We process them whenever a building or property manager asks, as part of the job.
No print-ready file? Our design team builds it, and you approve a proof before we cut anything.
We keep your artwork, sizes and colours on record, so your second batch matches the first exactly.
— Applications
Between them, our five panels cover most of what a business puts in front of its customers — on the building, in the lobby, at the kerb and out on site.
We build exterior wall panels, tenant and suite identification, post-and-panel signs and monument faces. We specify Dibond here so your sign survives years of sun, rain and road salt without warping off the wall.
We print listing boards, riders, open-house directionals and arrow signs on coroplast. We run them double-sided as standard, because kerbside traffic passes from both directions, and we count the stakes in.
Site identification, safety and notice boards, contractor panels and hoarding graphics. We move these up to 10mm coroplast so they last the length of your build. See our contractor signs.
We make logo walls, reception panels, conference room and door identification, plus plaques and recognition walls in acrylic — floated clear of the wall on standoffs we supply.
Directory boards, floor and department markers, parking directionals and menu panels in PVC. We produce them as one matched set, so your whole building reads consistently. See our directory signage.
Point-of-purchase panels, window and counter signage, trade show boards, easel displays and shaped cut-outs on foam board. We run these short and fast, because your promotion has a date on it.
— Comparison
Tell us where your sign lives and how long it has to last — that settles most orders before we get to price.
| Product | Environment | Thickness | Typical Life | Cost |
|---|---|---|---|---|
| Coroplast | Lawns, verges & front yards Real estate listings, campaigns, open houses | 4mm | Weeks to a season | $ |
| Coroplast 10mm | Job sites, fences & hoardings Site notices, safety boards, contractor ID | 10mm | Weeks to a season | $ |
| Foam board | Easels, displays & trade shows Presentation boards, retail POP, events | 3/16″ · 1/2″ | Event to months | $ |
| PVC / Sintra | Interior wayfinding & menu boards Directories, room signage, price panels | 3mm–19mm | Several years | $$ |
| Dibond | Permanent exterior on the building Storefronts, building ID, monument faces | 3mm · 6mm | Years in weather | $$$ |
| Acrylic | Reception walls & door plates Logo walls, suite plates, plaques | 1/8″–1/2″ | Years indoors | $$$ |
— Printing
We print your artwork directly onto the rigid panel using a flatbed press rather than printing onto vinyl and applying it afterward. That gives the finished sign a clean surface without vinyl edges lifting at the corners or bubbles showing through.
— Specifications
We cut every panel to order on our own laser and CNC rather than selling you a fixed size list.
— hardware
We ship the hardware with your sign, and add a drilling template wherever the mounting has to be accurate.
— Comparison
1
Tell us the size, quantity, where the sign is going and how long it needs to last. Send artwork in AI, EPS, PDF or SVG, or a high-resolution image. No artwork is not a problem for us.
2
We come back the same working day with a price and a production date, including hardware, delivery or installation. If a different panel serves you better, we tell you before you commit.
3
We send you a proof at actual size showing bleed, safe area and mounting positions. We print and cut nothing until you sign it off.
4
Collect from our Linden shop, let us deliver across the tri-state area with the protective film still on, or have our crews fit it on a date we schedule with you.
— FAQs
Rigid signs are printed on a solid flat panel rather than fabric or paper, so the sign holds its own shape. You can stake it into the ground, screw it to a wall, drop it into a frame or mount it on standoffs, with no hemming, grommets or pole pocket. We keep five panels in stock — coroplast, foam board, PVC, Dibond and acrylic — and between them they cover almost every rigid sign we make.
Dibond is what we specify for permanent outdoor signs — it will not rust or warp, and it stays flat across large panels through full sun and winter. For short-term outdoor work like campaigns, real estate listings and job sites we put you on coroplast is the standard because it is weatherproof and inexpensive enough to replace.
We cut single panels to any size up to roughly 48″ × 96″. Above that we build the sign as aligned panels with a deliberate reveal between them. Our common stock sizes are 18″ × 24″, 24″ × 36″ and 36″ × 48″, and anything outside those we cut to order without charging you a setup fee.
Yes — every panel we print can be contour cut on our laser and CNC equipment. Arrows, circles, logo outlines, cut lettering, internal apertures, radiused corners and drilled mounting holes are all standard. See cutting services.
It depends which panel we put you on. Coroplast is built for weeks to a season outdoors. Foam board is an indoor product and lasts as long as your display does. PVC gives you several years indoors or under cover. Dibond lasts years in full exterior weather, and printed acrylic lasts years indoors. We can specify UV-stable inks to extend outdoor life on any of them.
No. We run single panels and campaign runs of several hundred through the same equipment. Your price per sign falls as the quantity increases, and we apply volume pricing automatically — you do not need a trade account with us to get it.
We run most orders in a few business days from artwork approval, and we can go rush or same-day on stock sizes and thicknesses. Larger multi-panel orders, custom edge finishing and installed work we schedule at quote, so you have a firm date from us rather than an estimate.
Vector artwork in AI, EPS, PDF or SVG works best for logos, lettering and cut shapes. High-resolution JPG, PNG or TIFF is fine for photographic panels. If you do not have print-ready artwork our design team prepares it, and you approve a proof at actual size before anything is printed or cut.
It depends on the sign. We stake yard signs with wire H-stakes or step stakes. For wall panels we use standoff barrels, VHB tape, French cleats or direct screw fixing. Hoarding panels use grommets and cable ties. Exterior panels use post mounting or wall brackets. Hardware ships with the sign, with a drilling template where one is needed.
Yes. We produce in Linden, Union County, and deliver across New Jersey and the wider tri-state area including New York City. Our own crews handle installation, and buildings requiring certificates of insurance or after-hours access are accommodated as part of the job. Collection from the shop is also available.
Most orders run in a few business days from artwork approval, and we can go rush or same-day on stock sizes. Foam board is the fastest panel we run — no edge finishing, no mounting hardware, nothing to cure — which is why it suits work with a fixed date on it.
— Service area & quotes
We make every panel in Linden, Union County, and deliver or install across the tri-state area.
Rigid signage leaves our shop daily for office fit-outs, storefront installations, construction sites and real estate offices. Collect from us, let us deliver with the protective film still on, or have our own crews fit it. Buildings that need a certificate of insurance or after-hours access we handle as part of the job.
Our crews cross into the boroughs regularly too — Linden is a straight run from the Goethals and the Outerbridge.
Where we work most
OUR SHOP
7 W Baltimore Ave, Ste 301 Linden, NJ 07036
Prefer to talk it through?
