Painted Foam
Smooth painted face and sides in any color. The simplest and lowest cost option.
Foam Letters and Logos
Foam Letters With Big Depth and Light Weight for New Jersey Walls
Foam letters give you big, deep letters without the weight or the price of metal. We cut letters and logos from dense urethane foam, finish the face with paint, acrylic or a thin metal laminate, and install them on office, lobby and showroom walls across New Jersey. We also install in the five boroughs; see our NYC service area.
Up to 3 in DeepSix standard depths
Lightest LetterEasy on drywall
3 Face TypesPainted, acrylic or metal
Built in LindenMade and installed in house
Where we installBuilt in Linden. Our crews travel to you.
- New JerseyHome base
- New York CityAll five boroughs
- PhiladelphiaPennsylvania
- ScrantonPennsylvania
The Basics
What Foam Letters Are
A foam letter is cut from a dense urethane foam block, so it has real depth but weighs very little.
The foam body makes the depth. The face makes the look: plain paint, a glossy acrylic face, or a thin aluminum or metal laminate face that reads like metal from across the room.
Because they are so light, foam letters are a smart pick for large logos, drywall, temporary spaces and tight budgets. They are made for inside use. For outside, look at metal or acrylic letters.
LightEasy on drywall and quick to install.
DeepUp to 3 inches of real depth.
Any facePaint, acrylic or a metal laminate.
InsideMade for lobbies, offices and displays.
Face Finishes
Three Ways to Finish the Face
Same foam body, three different looks.
Brushed Aluminum Face
A thin aluminum face over foam. Looks like solid metal at a fraction of the weight.
Metal Laminate Face
Brushed gold, silver or bronze laminate for a metal look on a budget.
Product photos courtesy of Gemini. Glossy acrylic faces are also available in many colors.
Depth and Size
Pick the Depth, Then the Height
Faced foam letters come in six standard depths, from 1/2 inch to 3 inches.
- Deeper letters throw a bigger shadow and read better from the side.
- Faced foam letters and logos usually run from about 4 to 25 inches tall each.
- Thin script and small taglines need enough stroke width for the depth you pick.
- We check your artwork against the depth before anything is cut.
Our Work
Foam Letters We Built and Installed
Deep, light letters on marble, stone and painted walls.
Materials and Price
Pick a Face, See What It Costs
The face sets the look and most of the price. The strip below shows what sets your exact number.
Satin Black Face
Smooth matte black laminate
- Best for
- Marble, stone and light walls
- Use
- Inside
Brushed Aluminum Face
Thin brushed metal over foam
- Best for
- Metal look on a budget
- Use
- Inside
Brushed Bronze Face
Warm gold tone laminate
- Best for
- Law firms and showrooms
- Use
- Inside
Textured Copper Face
Aged copper look laminate
- Best for
- Feature walls and hospitality
- Use
- Inside
What moves your priceOne quote covers the site survey, design, fabrication and installation.
MaterialHeight and countThickness or depthFinishLogo detailMounting and wallAccess
Get Your PriceLaminate face samples courtesy of Gemini. Painted faces cost the least.
From Shop to Wall
Four Ways Foam Letters Go Up on the Wall
Foam letters are light, so the mount depends on the wall and whether the letters may move later.
01Double face tape
Low profile and quick. Best on smooth, sound walls.
02Flush studs
Studs go into the wall for a tight, permanent fit.
03Studs with spacers
A small gap behind each letter for more shadow.
04Pad mount
Clear pads hold the letter off the wall.
Mounting photos courtesy of Gemini.
Who Uses Them
Where Foam Letters Make Sense
Big impact, light weight, friendly price.
OfficesLarge reception logos and brand walls.
Retail and showroomsFeature walls and category names.
SchoolsHallway letters and department names.
RestaurantsInterior logos and feature walls.
Leasing officesLogos that can move with the tenant.
Pop ups and eventsLight letters for short term spaces.
Medical and dentalPractice names at the front desk.
Law and financeMetal look letters for less.
How It Works
From Your Photo to a Finished Sign in Four Steps
One team and one price. Your quote covers the site survey, design, fabrication and installation, so nothing gets passed to another company.
-
01You
Send a photo and your logo
A photo of the wall or storefront, your logo and a rough size. Use the form, email or a call.
-
02Gogi Signs
Get your proof and price
We survey the site when needed and send a drawing with sizes, colors and mounting, plus one all in price.
-
03Gogi Signs
Approve and we build
A 50 percent deposit starts production in our Linden shop. If the sign needs a permit, we handle the paperwork.
-
04Gogi Signs
We install, you pay the balance
Our own crew installs it, with bucket and boom trucks for high work. The balance is due at installation.
What We Make
Signs for Inside, Outside and On the Road
Every sign family below is designed, built and installed by our own team in Linden. Tap one to see the jobs and options.
Plus the services around your sign
About Gogi Signs
A Family Owned Sign Shop in Linden, NJ
Gogi Signs has built signs for New Jersey and New York City businesses since 2005. Today one team in Linden designs, prints, cuts, builds and installs every job.
Nothing is brokered out. The people who quote your sign are the people who build it and hang it.
20+Years building signs
10,000Sq ft shop floor
Mon to SatOpen 9 AM to 6 PM
1 teamDesign, build, install
Service Areas
Built in Linden, Installed Wherever You Are
Our shop sits in Union County, so most New Jersey jobs are a short drive for our crews. Pick your area to see local work, or call us for projects farther away.
- Site surveys
- Installation and removals
- Rush orders
- Licensed and insured
New York City
All five boroughsPhiladelphia and Scranton
ProjectsLarger projects and multi location rollouts in Pennsylvania. Call 908-486-7000 to plan yours.
FAQs
Foam Letter Questions
Straight answers to what New Jersey businesses ask about foam letters.
What are foam letters made of?
Dense urethane foam, cut into letters and logo shapes. The face is painted, or covered with a thin acrylic or aluminum layer for a glossy or metal look.
Can foam letters go outside?
The foam letters on this page are made for inside use. For outside walls, metal, acrylic or formed plastic letters hold up better.
How deep can foam letters be?
Faced foam letters come in 1/2, 3/4, 1, 1 1/2, 2 and 3 inch depths.
How tall can foam letters be?
Faced foam letters and logos usually run from about 4 to 25 inches tall each. Tell us your wall size and we will suggest a height.
Do foam letters look cheap?
Not when they are faced. A brushed aluminum or laminate face reads like metal from normal viewing distance, and painted foam looks clean and solid.
How are foam letters mounted?
With double face tape, flush studs, studs with spacers, or pads. Tape is quickest; studs are more permanent.
Are foam letters cheaper than metal?
Yes. At the same size and depth they usually cost less, and they are much lighter to install.
Do you install foam letters in New York City?
Yes, in all five boroughs. See our NYC service area.
Keep Exploring
Related Signs and Services
Compare other letter materials, see signs that go with foam letters, or book a single service.
Other Letter Materials
Dimensional LettersCompare every raised letter typeMetal LettersAluminum, stainless, brass and bronzeAcrylic and Plastic LettersAcrylic, PVC and formed plasticFrom Our Blog
Guides on Planning and Cost
Plain answers from our shop on materials, sizing and planning. See all articles
Cost
What Affects the Cost of Commercial Signs?
Why two signs of the same size can be priced very differently.
Read article
Buying
What to Prepare Before Requesting a Sign Quote
Ten minutes with a tape measure and a phone camera saves weeks of revisions.
Read article
Planning
Temporary vs Permanent Business Signage
When a banner is enough and when the real sign should go up.
Read articleFree Quote
Start With a Photo and Your Logo
Send what you have. We reply with a drawing and one price that covers the survey, design, fabrication and installation.
Your logoAny file, even a photo of a business card
A site photoThe wall, window or storefront
A rough sizeWidth and height are enough
The addressSo we can plan the install
Call908-486-7000
Emailinfo@gogisigns.com
Shop7 W Baltimore Ave, Suite B, Linden, NJ
HoursMon to Sat, 9 AM to 6 PM
Request a Free Quote
Tell us about your project. A photo and your logo are enough to start.
Prefer to talk? Call 908-486-7000.