Van Wrap Design for Contractors: What to Put on a Work Van

Green plumbing van wrap seen at night

A contractor van is a sign that drives to every job. The best van wraps answer three questions in a few seconds: who you are, what you do and how to call you. This guide shows what to put on a work van and how to lay it out so drivers can read it at a light. Good van wrap design starts with what a driver can read in a few seconds.

Van Design at a Glance

Contractor van design at a glance
Contractor van design at a glance

The Three Second Rule

Most people see your van for a few seconds from a moving car. In that time they can read a name, a trade and maybe a phone number. Everything else is for people parked next to you or walking past a job.

Ford Transit van wrapped in blue and white HVAC company graphics
Name, trade and phone are readable from across the street

What Else to Include

Black company name and Brooklyn address lettering on a white van door
Company name and address lettering on a van door

Layout by Side

SidePut hereWhy
Driver sideLogo, trade, phoneSeen in traffic
Passenger sideLogo, trade, phone, servicesSeen by people on the sidewalk and at jobs
RearPhone and web, largeRead by drivers behind you
DoorsName, town, license, USDOTRequired markings at eye level

Design Rules That Work

What goes on each side of a work van
What goes on each side of a work van
Check your van proof
Check your van proof

Photos and Patterns

Photos of your work can sell, but busy collages read as noise at road speed. Use one strong photo or a simple pattern, and keep the text on a clean band. Printed cast film like 3M IJ180mC handles photos and body lines well.

Matching More Vans

Once the first van works, save the files and templates so every new van matches. See fleet wraps for how we keep mixed vans consistent.

White electrical contractor van with blue partial graphics and phone number
An older van matched to the new design

How We Handle Van Wrap Jobs

Every van wrap job at Gogi Signs follows the same path. We measure the vehicle at our Linden, New Jersey shop or at your location, and our sign design team sets your artwork on a template of the exact make and model. We print and laminate in house, and our own crews handle graphics installation in our heated bay or at your yard across New Jersey, New York City and the Philadelphia area. Old graphics come off in the same visit, and lettering is cut through our vinyl cutting service.

Most clients pair van wraps with truck wraps, fleet wraps and truck lettering. Sign shops and agencies can order the same work through our wholesale program. See every option on our vehicle graphics page or browse more guides on the Gogi Signs blog.

Common Questions

What should go on a contractor van?

Name, logo, trade, phone, web and any required license or USDOT numbers.

How big should the phone number be?

At least 4 inches tall on the sides, bigger on the rear.

Should I list all my services?

No. Pick three to five that bring the most work.

Do I need my license number on the van?

Many trades must show it on advertising. Check your licensing board.

Where should a QR code go?

On the rear or passenger side, at eye level, for people standing nearby.

Can you design it for me?

Yes. Send your logo and a list of services. See sign design.

Our Take

Keep it to name, trade and phone at road speed, then add services and required numbers where people stand. For more contractor van examples, see Signs NY van wrapping and see the van wraps from Pixel Wraps, our sister graphics shop. See our van wraps page for real vans we wrapped.

Share this guide

LinkedIn
Facebook
Email
Picture of Tony Kamal
Tony Kamal

Tony Kamal has been making signs for two decades and works at the Gogi Signs of New Jersey shop in Linden. Since 2025 he has also been researching permit rules, materials and lighting, and he writes these guides with input from our designers, fabricators and install crews.

Keep Reading

Wrapped service van inside the Gogi Signs install bay

Vehicle Wrap Advertising: How to Track Calls From Your Van

How to tell if your van wrap brings in work:....
Front view of a yellow wrapped Transit van in the shop

Sprinter, Transit or ProMaster: Wrapping High Roof Vans

How Sprinter, Transit and ProMaster vans differ for wrapping: panel....
Contractor van with ladder rack and partial wrap graphics

Full Wrap vs Partial Wrap vs Lettering: Which One Fits

Full wrap, partial wrap or cut vinyl lettering: how each....
Free quote · No obligation
Planning a new sign?

Talk to the team that designs, permits, builds and installs it from our Linden, NJ shop.

Mon to Sat · 9:00 AM to 6:00 PM

Recent Blogs

Your Next Sign Starts Here